ARIES
Technology and Physics Assessment – Aggressive and Conservative Tokamaks
(ACT)
ACT-I:
Aggressive technology (SiC blanket) and aggressive physics
ARIES
Systems Code Outputs for SiC blanket – ACT-I
V.30 (SVN
version control), Printed: LCC 4/08/11
Point #
289722 from raw sysout.data sic806 database
UPDATED 6/8/11, revised to ACT-Ib:
V.32 (SVN
version control), Printed: LCC 6/08/11
- Same strawman
point as V.30 but corrected maintenance port volumes and costing, slight
increase in COE.
- Corrected plasma surface areas
and NWL to use more accurate discretized geometry formulas.
- Most hard-wired numbers have
been removed and placed in the specific input files; formatting improved.
Input data:
Material Properties – density, cost, cost
base
Output data:
- Plasma parameters
- Vertical build
- IB/OB builds
- Geometric data – volumes
- Geometric data – surface
areas
- Liquid metal mass
- Material-based component costs
2D CAD drawing from systems code – PNG,
TIF
***************************
Select
Divertor Design *
type
"1" to use, *
"0"
to turn off *
1) J.
Burke T-tube design *
0
*
2) X. Wang
plate design *
1
*
3) X. Wang
finger design *
0
*
***************************
Select
Blanket Design *
type
"1" to use, *
"0"
to turn off *
1) SiC
blanket
*
1
*
2) DCLL
blanket *
0
*
***************************
Select
Output Format
*
type
"1" to use, *
"0"
to turn off *
1)
"COE" production mode *
for scanning
parameters *
0
*
2)
"SYSTEM" detailed mode *
for analysis on
single pt*
1
*
***************************
0
1 2 3
4 5 6 7 8
9
10 11 *
IB SOL First Wall Gap
Blanket
Gap HT Shield Gap Vac. Vessel
Gap TF Coil Gap Bucking Cy*
1.000E-01
1.400E-02
0.000E+00 3.360E-01 1.000E-02 2.400E-01 1.000E-02 4.000E-01 2.000E-02 0.000E+00 0.000E+00 0.000E+00
*
OB SOL First Wall Gap
Blanket
Gap Blanket II HT Shield Gap Vac. Vessel - -
- *
1.000E-01
1.400E-02
0.000E+00 2.860E-01 0.000E+00 4.500E-01 1.500E-01 2.000E-02 2.500E-01 0.000E+00 0.000E+00 0.000E+00
*
VB Div Plate
Repl HTS Gap HT Shield Gap Vac. Vessel
Cryodome - - - - -
*
3.350E-02
1.500E-01
0.000E+00 3.000E-01 2.000E-02 4.000E-01 4.000E-01 0.000E+00 0.000E+00 0.000E+00 0.000E+00 0.000E+00
*
*
Real Discount Rate
*
5.000E-02
Economic Life of Plant (Years)
*
4.000E+01
Neutron Fluence Life ( W*year/(m^2)
)
*
1.800E+07
Annual Escalation Rate
*
5.000E-02
Construction Period (Years)
*
6.000E+00
Plant Capacity Factor
*
8.500E-01
Annual Fuel Cost (M$)
*
1.000E+06
Decontamination & Decomm. Allowance (mills/kWh) *
2.000E+00
Reference/base year for cost basis
*
2.009E+03
Projected year for cost basis
*
2.009E+03
Maximum
stress in protective sheath around strands [Pa]*
8.000E+08
Maximum
allowed stress in the coil casing [Pa] *
4.000E+08
Current
density in copper [A/m^2] *
2.24E+08
Volume
fraction of He coolant [-]
*
2.500E-01
Volume
fraction of the insulator [-]
*
1.000E-01
Nominal
current in TF coil [A]
*
4.000E+04
Side
thickness of the coil casing X 2 [m]
*
2.000E-02
Clearance
between V Vessel and TF coil outmost edge [m]*
1.000E-01
Yield
stress for the PF coil case [Pa]
*
1.000E+09
Upper
limiter of the current (qmax)
*
4.500E+00
Lower
limiter of the current (qmin)
*
3.150E+00
Maximum
allowed magnetic field on PF coils [T] *
1.800E+01
Quench
protection parameter J2tau
*
5.000E+16
Quench
time [s]
*
2.000E+00
Number
of TF coils
*
1.600E+01
Fraction
of loss of alpha particles [-]
*
0.000E+00
Fraction
of alpha loss to divertor [-]
*
0.500E+00
Fraction
of edge radiation (typical range 0.75-0.9) [-]*
0.900E+00
Fraction
of edge radiation to divertor [-]
*
0.900E+00
Neutron
energy multiplication factor FW/blanket inboard*
1.100E+00
Neutron energy multiplication factor FW/blanket outb. *
1.100E+00
Neutron
energy multiplication factor shield inboard *
1.100E+00
Neutron
energy multiplication factor shield outboard *
1.100E+00
Neutron
energy multiplication factor divertor plates *
1.100E+00
Neutron
energy multiplication factor divertor blanket *
1.100E+00
Neutron
energy multiplication factor divertor shield *
1.100E+00
Efficiency
of the He pump/blower [-]
*
0.900E+00
Generic
current drive source efficiency [-]
*
0.500E+00
Current
drive source efficiency (NB) [-]
*
0.680E+00
Current
drive source efficiency (LH) [-]
*
0.680E+00
Current
drive source efficiency (ICRF) [-]
*
0.840E+00
Current
drive source efficiency (EC) [-]
*
0.430E+00
Power to
all auxiliary functions [W]
*
5.000E+07
Cryogenic
power [W]
*
2.000E+06
Efficiency
of plasma heating [-]
*
0.430E+00
Outboard
fraction of incoming power [-]
*
0.600E+00
Inboard
fraction of incoming power [-]
*
0.400E+00
Fraction
of neutron flux absorbed by FW/blanket [-] *
0.900E+00
Fraction
of neutron flux absorbed by the shield [-] *
0.100E+00
Fraction
of neutron pow. to divertor in div. plates [-]*
0.500E+00
Fraction
of neutron pow. to divertor in div. blnkt. [-]*
0.400E+00
Fraction
of neutron pow. to divertor in div. shield [-]*
0.100E+00
Up-down
symmetry factor. 1 for symmetric, 0 otherwise *
1.000E+00
Fraction
of conducted power to divertor => outboard [-]*
0.800E+00
Fraction
of conducted power to divertor => inboard [-] *
0.200E+00
Fraction
of radiated power to divertor => outboard [-] *
0.800E+00
Fraction
of radiated power to divertor => inboard [-] *
0.200E+00
Poloidal
magnetic flux expansion on outboard [-] *
1.000E+01
Poloidal
magnetic flux expansion on inboard [-] *
1.000E+01
Efficiency
of the LM MHD pump [-]
*
0.400E+00
Efficiency
of the LM mechanical pump [-]
*
0.900E+00
NB
(neutral beam) power in use [W]
*
0.000E+00
NB
(neutral beam) unit cost [M$]
*
3.450E+00
LH (lower
hybrid) power in use [W] *
3.442E+07
LH (lower
hybrid) unit cost [M$]
*
1.490E+00
FW (fast
wave) power in use [W]
*
3.284E+06
FW (fast
wave) unit cost [M$]
*
0.000E+00
FW (fast
wave) frequency in use [W]
*
9.500E+07
Penetration
Shielding Thickness [% of HT shielding] *
2.500E-01
Fraction
of neutron power from plasma to div (A=4) [-] *
1.000E-01
Fraction
of neutron power from plasma to blanket IB [-]*
2.500E-01
Fraction
of neutron power from plasma to blanket OB [-]*
6.500E-01
Plasma
outer squareness [-]
*
1.000E-06
Plasma
inner squareness [-]
*
-1.000E-06
|
Material
Properties used in ASC: |
|
|||||
|
|
|
|
|
|||
|
All
properties updated 12/08/10 'Fabrication Costs per kgRevN(01192011).xls' (L. Waganer) |
||||||
|
|
|
|
|
|||
|
Material
Name |
Density
(kg/m3) |
$/kg |
Cost
basis year |
|||
|
B-FS |
7800 |
35.54 |
2009 |
|||
|
PbLi |
8897 |
8.79 |
2009 |
|||
|
RAFS |
9500 |
43.44 |
2009 |
|||
|
SiC-comp
|
3200 |
584.64 |
2009 |
|||
|
SS |
7800 |
81.46 |
2009 |
|||
|
Void |
0 |
0 |
2009 |
|||
|
W |
19300 |
120.37 |
2009 |
|||
|
WC |
15600 |
34.39 |
2009 |
|||
|
TF-coil |
7500 |
50.912 |
1992 |
|||
|
PF-coil |
7500 |
82.919 |
1992 |
|||
|
Nb3Sn |
7500 |
92.7 |
1992 |
|||
|
Cu |
7300 |
65.4 |
1992 |
|||
|
YBCO |
6200 |
92.7 |
1992 |
|||
|
Ag |
10500 |
201.1 |
1992 |
|||
|
CeO2 |
7130 |
16.516 |
1992 |
|||
|
Polyamide
|
1920 |
16.516 |
1992 |
|||
|
Inconel |
8440 |
96.02 |
2009 |
|||
|
JK2LB |
8000 |
95 |
2009 |
|||
|
SS316 |
7860 |
68.657 |
1992 |
|||
|
FS |
7800 |
89.42 |
2009 |
|||
|
He |
0.1786 |
70 |
2011 |
|||
|
RAFS-div
|
7800 |
111.77 |
2009 |
|||
|
RAFS-cryost |
7800 |
28.06 |
2009 |
|||
|
|
|
|
|
|||
|
*PbLi is
'Li17Pb83, liquid (90% Li6 enrichment) @ 650C' |
||||||
|
*Helium is 99.999% pure, cost $70.0/kg
|
|
|||||
|
*Helium cost is zero in the table
since it is added at startup and not part of the building contract |
||||||
|
GDP
Inflation Factors used in ASC: |
|
|
|
|
|
All
factors updated 12/02/10 per 'GDP current(103010)(2005
basis).xls' L. Waganer |
|
|
Year
used: |
2009 |
|
|
|
|
Year |
Inflation
Factor |
|
1970 |
0.2432 |
|
1971 |
0.2553 |
|
1972 |
0.2663 |
|
1973 |
0.2811 |
|
1974 |
0.3067 |
|
1975 |
0.3356 |
|
1976 |
0.3549 |
|
1977 |
0.3775 |
|
1978 |
0.404 |
|
1979 |
0.4376 |
|
1980 |
0.4775 |
|
1981 |
0.5222 |
|
1982 |
0.5541 |
|
1983 |
0.576 |
|
1984 |
0.5977 |
|
1985 |
0.6158 |
|
1986 |
0.6294 |
|
1987 |
0.6476 |
|
1988 |
0.6699 |
|
1989 |
0.6952 |
|
1990 |
0.722 |
|
1991 |
0.7476 |
|
1992 |
0.7653 |
|
1993 |
0.7822 |
|
1994 |
0.7987 |
|
1995 |
0.8154 |
|
1996 |
0.8309 |
|
1997 |
0.8456 |
|
1998 |
0.8551 |
|
1999 |
0.8677 |
|
2000 |
0.8865 |
|
2001 |
0.9065 |
|
2002 |
0.9212 |
|
2003 |
0.941 |
|
2004 |
0.9677 |
|
2005 |
1 |
|
2006 |
1.0326 |
|
2007 |
1.063 |
|
2008 |
1.0862 |
|
2009 |
1.0961 |
|
2010 |
1.1071 |
|
|
|
|
*2005 basis |
|
|
Defining
Power Plant Parameters: |
|
|
|
SVN Rev
# 32; Printed
on Wed Jun 8 15:09:06 2011 |
|
|
|
|
|
|
|
Plasma major radius [m]: |
5.5 |
|
|
Plasma aspect ratio [-]: |
4 |
|
|
Toroidal mag. field at plasma major
radius [T]: |
5.5 |
|
|
Plasma current [MA]: |
10.58 |
|
|
Normalized Beta [-]: |
4.5 |
|
|
MHD safety factor [-]: |
4.4 |
|
|
Cylindrical safety factor [-]: |
2.609 |
|
|
Plasma triangularity [-]: |
0.7 |
|
|
Exponent on plasma density profile
[-]: |
0.3 |
|
|
Exponent on plasma temperature profile
[-]: |
0.8 |
|
|
Greenwald density fraction [-]: |
0.95 |
|
|
Fusion gain [-]: |
40 |
|
|
Plasma elongation [-]: |
2.2 |
|
|
H98(y,2)
multiplier on energy confinement scaling [-]: |
1.441 |
|
|
Current diffusion time [s]: |
221.3 |
|
|
Energy confinement time [s]: |
1.536 |
|
|
Ratio of effec.
particle conf. time to energy conf. time [-]: |
5.091 |
|
|
Volume average electron density
[m^-3]: |
1.52E+20 |
|
|
Volume average temperature [KeV]: |
16.56 |
|
|
Flattop time [s]: |
1.00E+30 |
|
|
L to H-mode threshold power [MW]: |
44.4 |
|
|
Ave neutron wall load (at plasma
surface) [MW/m^2]: |
3.07317 |
|
|
Bremsstrahlung
radiation loss [MW]: |
50.64 |
|
|
Bootstrap current fraction [-]: |
0.8998 |
|
|
Current drive efficiency for generic
heating/CD source [-]: |
0.27 |
|
|
Power from generic CD source
(steady-state) [MW]: |
26.9 |
|
|
Total aux. heating power into plasma
for power balance [MW]: |
45.1 |
|
|
Cyclotron radiation loss [MW]: |
12.02 |
|
|
Ohmic power
in plasma [MW]: |
0.0584 |
|
|
Line radiation loss [MW]: |
29.24 |
|
|
Fast alpha beta [-]: |
0.9679 |
|
|
Effective charge [-]: |
2.064 |
|
|
Ratio of plasma temperature at center
to edge [-]: |
0 |
|
|
Ratio of plasma density at center to
edge [-]: |
0 |
|
|
Eta_CD for
source 1 [-]: |
5.89E-44 |
|
|
Eta_CD for
source 2 [-]: |
-4.32E-26 |
|
|
Eta_CD for
source 3 [-]: |
0 |
|
|
Eta_CD for
source 4 [-]: |
0 |
|
|
Impurity fraction 1 [-]: |
0.003 |
|
|
Impurity fraction 2 [-]: |
0 |
|
|
Impurity fraction 3 [-]: |
0 |
|
|
Peak temperature [keV]:
|
26.75 |
|
|
External CD fraction of total plasma
current [-]: |
0.1002 |
|
|
Total non-inductive fraction of total
plasma current [-]: |
1 |
|
|
Density fraction of helium (frac. of electron density) [-]: |
0.07288 |
|
|
Density fraction of DT fuel (frac. of electron density) [-]: |
0.8002 |
|
|
Plasma stored energy [MJ]: |
513.2 |
|
|
Poloidal flux swing required to raise plasma current [?]: |
300 |
|
|
Loop voltage in plasma [V]: |
0 |
|
|
Density profile peak-to-volume average
[-]: |
1.295 |
|
|
Temperature profile peak-to-volume
average [-]: |
1.796 |
|
|
Poloidal beta [-]: |
2.348 |
|
|
Toroidal beta [-]: |
6.295 |
|
|
Alpha power in plasma [MW]: |
361.3 |
|
|
Ratio of loss power to L-H threshold
power [-]: |
7.525 |
|
|
Plasma surface area [m^2]: |
470.264 |
|
|
Maximum magnetic field in the TF coil
[T]: |
10.1896 |
|
|
Maximum IB heat flux on divertor
[MW/m^2]: |
2.9255 |
|
|
Maximum OB heat flux on divertor
[MW/m^2]: |
6.70536 |
|
|
Maximum heat flux to the first wall
[MW/m^2]: |
0.274874 |
|
|
Gross electrical power [MW]: |
1181.54 |
|
|
Net electric power [MW]: |
1007.49 |
|
|
Recirculated
power (Pgross - Pnet)
[MW]: |
174.048 |
|
|
Thermal power [MW]: |
2065.4 |
|
|
Fusion power [MW]: |
1804 |
|
|
Cost of electricity [mills/kWh]: |
58.3027 |
|
|
Data point number from plasma physics output
file [-]: |
289721 |
|
|
|
|
|
|
|
|
|
|
=============================================================== |
|
|
|
Defining
Parameters for Plasma Closed Surface Equation: |
|
|
|
|
|
|
|
Plasma major radius [m]: |
5.5 |
|
|
Plasma minor radius [m]: |
1.375 |
|
|
Elongation [-]: |
2.2 |
|
|
Triangularity [-]: |
0.7 |
|
|
Outer Squareness [-]: |
6.32404e-322 |
|
|
Inner Squareness [-]: |
0 |
|
|
Scrape-off layer [m]: |
0.1 |
|
|
|
|
|
|
Vertical
Build [m]: |
|
|
|
Divertor Plate: |
0.0335 |
|
|
Replaceable HT Shield: |
0.289777 |
|
|
Gap: |
0 |
|
|
HT Shield: |
0.3 |
|
|
Gap: |
0.02 |
|
|
Vacuum Vessel: |
0.4 |
|
|
|
|
|
|
Inboard/Outboard
Radial Build in TETRA Format [m]: |
|
|
|
|
Thickness
|
Radius |
|
Device Centerline |
0.0000 |
0 |
|
Bore |
2.27598 |
2.27598 |
|
Central Solenoid |
0.139506
|
2.41548 |
|
Gap |
0.02 |
2.43548 |
|
Bucking Cylinder |
0.206699
|
2.64218 |
|
Gap |
0 |
2.64218 |
|
TF Coil Annulus |
0.326523
|
2.9687 |
|
Gap |
0.0136666
|
2.98237 |
|
Vacuum Vessel |
0.4 |
3.38237 |
|
Gap |
0.066292
|
3.44866 |
|
HT Shield IB |
0.229777
|
3.67844 |
|
Gap |
0.01 |
3.68844 |
|
Blanket IB |
0.32256 |
4.011 |
|
Gap |
0 |
4.011 |
|
First Wall IB |
0.014 |
4.025 |
|
Scrape-Off Layer IB |
0.1 |
4.125 |
|
Plasma Centerline |
1.375 |
5.5 |
|
Plasma Outer Edge |
1.375 |
6.875 |
|
Scrape-Off Layer OB |
0.1 |
6.975 |
|
First Wall OB |
0.014 |
6.989 |
|
Gap |
0.000340877
|
6.98934 |
|
Blanket OB |
0.274549
|
7.26389 |
|
Gap |
0.01 |
7.27389 |
|
Blanket II |
0.430831
|
7.70472 |
|
Gap |
0.0100091
|
7.71473 |
|
HT Shield OB |
0.289777
|
8.00451 |
|
Gap |
0.4 |
8.40451 |
|
Vacuum Vessel |
0.25 |
8.65451 |
|
Gap |
3.15477 |
11.8093 |
|
TF Coil |
0.326523
|
12.1358 |
|
Gap |
0.949361
|
13.0852 |
|
Cryostat |
0.4 |
13.4852 |
|
|
|
|
|
|
|
|
|
=============================================================== |
|
|
|
Geometric
Data: Volumes [m^3]: |
|
|
|
|
|
|
|
Plasma: |
|
|
|
Plasma_AT: |
400.646 |
|
|
First
Wall: |
|
|
|
FirstWallInboard:
|
1.87531 |
|
|
FirstWallOutboard:
|
5.97294 |
|
|
Total First Wall: |
7.84825 |
|
|
Blankets:
|
|
|
|
BlanketInboard:
|
41.3975 |
|
|
BlanketOutboard:
|
104.923 |
|
|
BlanketII: |
175.005 |
|
|
Total Blankets: |
321.325 |
|
|
|
|
|
|
Divertor
Plates (6): |
|
|
|
Div1: |
0.558501 |
|
|
Div2: |
1.17735 |
|
|
Div3: |
1.05001 |
|
|
Div4: |
1.05417 |
|
|
Div5: |
1.18835 |
|
|
Div6: |
0.554716 |
|
|
Total Divertor: |
5.58309 |
|
|
|
|
|
|
Replaceable
HT Shields: |
|
|
|
RepHTShieldTop:
|
20.3655 |
|
|
RepHTShieldBottom:
|
20.3655 |
|
|
Total Repl. HT Shields: |
40.731 |
|
|
|
|
|
|
HT
Shields: |
|
|
|
HTShieldInboard:
|
24.9345 |
|
|
HTShieldOutboard:
|
220.09 |
|
|
Penetration Shielding Thickness: |
61.2562 |
|
|
Total HT Shields: |
306.281 |
|
|
|
|
|
|
Vacuum
Vessel: |
|
|
|
VacuumVesselMain:
|
89.7315 |
|
|
VacuumVesselOutboard:
|
185.531 |
|
|
Total Vacuum Vessel: |
275.262 |
|
|
|
|
|
|
Maintenance
Ports (16): |
|
|
|
MaintenancePort:
|
301.466 |
|
|
UpperVVDuctBottomWall:
|
22.7948 |
|
|
UpperVVDuctTopWall:
|
12.6746 |
|
|
UpperVVDuctSideWall:
|
48.5187 |
|
|
Total All Ports: |
385.454 |
|
|
|
|
|
|
TF Coils
(16): |
|
|
|
Total TF Coils: |
185.44 |
|
|
|
|
|
|
BuckingCylinder:
|
33.1309 |
|
|
TF Coil Upper Cap: |
52.9419 |
|
|
TF Coil Lower Cap: |
52.9419 |
|
|
Cryostat: |
1076.31 |
|
|
|
|
|
|
PF Coils
(36 active, 14 spares [preliminary]): |
|
|
|
PFCoil_0: |
2.5825 |
|
|
PFCoil_1: |
2.58375 |
|
|
PFCoil_2: |
2.585 |
|
|
PFCoil_3: |
2.58626 |
|
|
PFCoil_4: |
1.35707 |
|
|
PFCoil_5: |
1.51535 |
|
|
PFCoil_6: |
1.67251 |
|
|
PFCoil_7: |
2.05531 |
|
|
PFCoil_8: |
2.2034 |
|
|
PFCoil_9: |
2.2129 |
|
|
PFCoil_10: |
2.0627 |
|
|
PFCoil_11: |
1.69199 |
|
|
PFCoil_12: |
1.17736 |
|
|
PFCoil_13: |
0.35272 |
|
|
PFCoil_14: |
0.484511 |
|
|
PFCoil_15: |
0.69244 |
|
|
PFCoil_16: |
0.82236 |
|
|
PFCoil_17: |
0.847845 |
|
|
PFCoil_18: |
0.848256 |
|
|
PFCoil_19: |
0.822758 |
|
|
PFCoil_20: |
0.692775 |
|
|
PFCoil_21: |
0.484744 |
|
|
PFCoil_22: |
0.352889 |
|
|
PFCoil_23: |
1.17793 |
|
|
PFCoil_24: |
1.6928 |
|
|
PFCoil_25: |
2.0637 |
|
|
PFCoil_26: |
2.21397 |
|
|
PFCoil_27: |
2.20446 |
|
|
PFCoil_28: |
2.05629 |
|
|
PFCoil_29: |
1.67331 |
|
|
PFCoil_30: |
1.51606 |
|
|
PFCoil_31: |
1.35771 |
|
|
PFCoil_32: |
2.58751 |
|
|
PFCoil_33: |
2.58626 |
|
|
PFCoil_34: |
2.585 |
|
|
PFCoil_35: |
2.58375 |
|
|
Active PF Coil Vol. (36): |
58.9862 |
|
|
Spare PF Coil Vol. (14): |
19.1485 |
|
|
Total PF Coils Vol.: |
78.1346 |
|
|
|
|
|
|
Total FW and Blankets: |
329.173 |
|
|
(IB, OB FW & Blanket, Blanket II)
|
|
|
|
|
|
|
|
Total Power Core (FPC) Vol: |
1220.61 |
|
|
(IB, OB FW & Blanket, Blanket II,
Divertor, TF & PF magnets, |
|
|
|
VV, HT & Repl. Shield w/
Penetration Shielding) |
|
|
|
|
|
|
|
Support Structure Volume: |
244.121 |
|
|
(20% of FPC vol)
|
|
|
|
|
|
|
|
|
|
|
|
=============================================================== |
|
|
|
Surface
Areas [m^2]: |
|
|
|
|
|
|
|
Plasma Surface Area: |
470.264 |
|
|
Plasma Surface Area including SOL: |
502.269 |
|
|
(using
discretized geometry formulas) |
|
|
|
Scrape-off layer (SOL) thickness: |
0.1 |
|
|
|
|
|
|
FirstWallInboard:
|
132.633 |
|
|
FirstWallOutboard:
|
372.212 |
|
|
Total First Wall: |
504.845 |
|
|
|
|
|
|
Div1: |
18.6167 |
|
|
Div2: |
39.2449 |
|
|
Div3: |
35.0002 |
|
|
Div4: |
35.139 |
|
|
Div5: |
39.6118 |
|
|
Div6: |
18.4905 |
|
|
Total Divertors: |
186.103 |
|
|
|
|
|
|
|
|
|
|
=============================================================== |
|
|
|
Liquid
Metal Mass [tonne] |
|
|
|
|
|
|
|
FirstWallInboard:
|
4.50485 |
|
|
FirstWallOutboard:
|
14.3481 |
|
|
BlanketInboard:
|
305.7 |
|
|
BlanketOutboard:
|
774.805 |
|
|
BlanketII: |
1198.9 |
|
|
Div1: |
0 |
|
|
Div2: |
0 |
|
|
Div3: |
0 |
|
|
Div4: |
0 |
|
|
Div5: |
0 |
|
|
Div6: |
0 |
|
|
Total Divertors: |
0 |
|
|
RepHTShieldTop:
|
18.1192 |
|
|
RepHTShieldBottom:
|
18.1192 |
|
|
Total Repl
HT Shields: |
36.2384 |
|
|
HTShieldInboard:
|
22.1842 |
|
|
HTShieldOutboard:
|
195.814 |
|
|
Total HT Shields: |
217.999 |
|
|
|
|
|
|
Total Mass Liquid Coolant: |
2552.5 |
|
|
Total w/ 2.5x BOP Factor: |
6381.25 |
|
|
|
|
|
|
|
|
|
|
=============================================================== |
|
|
|
Material-based Component Costs [M$]: |
|
|
|
|
|
|
|
FirstWallInboard:
|
2.43309 |
|
|
FirstWallOutboard:
|
7.74949 |
|
|
BlanketInboard:
|
12.5079 |
|
|
BlanketOutboard:
|
31.7017 |
|
|
BlanketII: |
74.4042 |
|
|
Divertors: |
0.525676 |
|
|
|
|
|
|
RepHTShieldTop:
|
9.66353 |
|
|
RepHTShieldBottom:
|
9.66353 |
|
|
HTShieldInboard:
|
14.3823 |
|
|
HTShieldOutboard:
|
104.434 |
|
|
Total HT Shield: |
118.816 |
|
|
|
|
|
|
VacuumVesselMain:
|
34.5401 |
|
|
VacuumVesselOutboard:
|
22.9695 |
|
|
Total Vacuum Vessel: |
57.5096 |
|
|
|
|
|
|
MaintenancePort:
|
110.733 |
|
|
UpperVVDuctBottomWall:
|
8.37289 |
|
|
UpperVVDuctTopWall:
|
4.6556 |
|
|
UpperVVDuctSideWall:
|
17.8217 |
|
|
Total All Ports = 141.584 |
|
|
|
|
|
|
|
Total TF Coils Cost: |
141.776 |
|
|
|
|
|
|
BuckingCylinder:
|
13.6725 |
|
|
TF Coil Upper Cap: |
21.8481 |
|
|
TF Coil Lower Cap: |
21.8481 |
|
|
CryoDome: |
42.4027 |
|
|
|
|
|
|
PF Coil
Costs (36 active, 14 spares [preliminary]): |
|
|
|
PFCoil_0: |
2.30024 |
|
|
PFCoil_1: |
2.30136 |
|
|
PFCoil_2: |
2.30247 |
|
|
PFCoil_3: |
2.30359 |
|
|
PFCoil_4: |
1.20875 |
|
|
PFCoil_5: |
1.34973 |
|
|
PFCoil_6: |
1.48972 |
|
|
PFCoil_7: |
1.83068 |
|
|
PFCoil_8: |
1.96258 |
|
|
PFCoil_9: |
1.97104 |
|
|
PFCoil_10: |
1.83726 |
|
|
PFCoil_11: |
1.50706 |
|
|
PFCoil_12: |
1.04868 |
|
|
PFCoil_13: |
0.314169 |
|
|
PFCoil_14: |
0.431557 |
|
|
PFCoil_15: |
0.61676 |
|
|
PFCoil_16: |
0.73248 |
|
|
PFCoil_17: |
0.75518 |
|
|
PFCoil_18: |
0.755546 |
|
|
PFCoil_19: |
0.732834 |
|
|
PFCoil_20: |
0.617058 |
|
|
PFCoil_21: |
0.431764 |
|
|
PFCoil_22: |
0.31432 |
|
|
PFCoil_23: |
1.04919 |
|
|
PFCoil_24: |
1.50779 |
|
|
PFCoil_25: |
1.83815 |
|
|
PFCoil_26: |
1.97199 |
|
|
PFCoil_27: |
1.96352 |
|
|
PFCoil_28: |
1.83155 |
|
|
PFCoil_29: |
1.49043 |
|
|
PFCoil_30: |
1.35037 |
|
|
PFCoil_31: |
1.20932 |
|
|
PFCoil_32: |
2.30471 |
|
|
PFCoil_33: |
2.30359 |
|
|
PFCoil_34: |
2.30247 |
|
|
PFCoil_35: |
2.30136 |
|
|
Active PF Coil Cost (36): |
52.5393 |
|
|
Spare PF Coil Cost (14): |
17.0556 |
|
|
Total PF Coil Cost: |
69.5949 |
|
|
|
|
|
|
Total First Wall, Blankets: |
128.796 |
|
|
Total HT Shield: |
138.143 |
|
|
Total Power Core: |
266.94 |
|
|
Powers
[MW]: |
|
|
Printed
on Wed Jun 8 15:09:06 2011 |
|
|
|
|
|
Plasma Power: |
406.4 |
|
Alpha Power: |
361.3 |
|
Neutron Power: |
1445.2 |
|
Thermal Power: |
2065.4 |
|
Fusion Power: |
1806.5 |
|
Gross Electrical Power: |
1181.54 |
|
Net Electrical Power: |
1007.49 |
|
|
|
|
Divertor in use: |
plate-type, helium-cooled |
|
He pump/blower efficiency: |
0.9 |
|
Divertor pumping power (He only): |
19.6173 |
|
Recovered power from He pump: |
11.8458 |
|
(P_he_pump_recovered
= P_pump_divertor / eta_pump_he
* eta_pump_he_recovered * eta_brayton) |
|
|
|
|
|
Blanket in use: |
SiC
blanket, PbLi-cooled |
|
LM pump in use: |
mechanical LM pump |
|
LM pump efficiency: |
0.9 |
|
Blanket pumping power (LM only): |
5.85626 |
|
Recovered power from LM pump: |
3.53626 |
|
(P_lm_pump_recovered
= P_pump_blanket / eta_pump_lm_mech
* eta_pump_lm_mech_recovered * eta_brayton) |
|
|
|
|
|
TF magnets in use: |
low-temp SC magnet technology |
|
Nb3Sn at 4.2 K, 'Next Step,
conservative costing' |
|
|
|
|
|
|
|
|
Additional
Parameters: |
|
|
Gross Cycle Efficiency (Brayton): |
0.572061 |
|
Plasma Heating [MW]: |
18.2 |
|
Plasma Heating Efficiency: |
0.43 |
|
Current Drive Power [MW]: |
26.9 |
|
Current Drive Efficiency: |
0.5 |
|
Aux. Functions Power [MW]: |
63 |
|
Cryo Power
[MW]: |
2 |
|
|
|
|
Neutron
Power Distribution: (A=4) |
|
|
Divertors: |
0.1 |
|
IB Blanket: |
0.25 |
|
OB Blanket: |
0.65 |
|
|
|
|
Power to Divertor [MW]: |
295.385 |
|
Divertor Heat Flux max [MW/m2]: |
6.70536 |
|
|
|
|
NWL ave
(plasma surface) [MW/m2]: |
3.07317 |
|
NWL max (plasma surface) [MW/m2]: |
4.76341 |
|
NWL ave
(incl. SOL) [MW/m2]: |
2.87734 |
|
NWL max (incl. SOL) [MW/m2]: |
4.45988 |
|
Peaking factor: |
1.55 |
|
|
|
|
Power to FW [MW]: |
111.015 |
|
FW Heat Flux ave
[MW/m2]: |
0.219899 |
|
FW Heat Flux max [MW/m2]: |
0.274874 |
|
Costing
Accounts with SiC Blanket |
|
|
Costs
are M$ in 2009$ |
|
|
Printed
on Wed Jun 8
15:09:06 2011 |
|
|
|
|
|
|
|
|
20.0 Land and Land Rights: |
24.0468 |
|
20.1 Land and Privilege Acquistion: |
20.0448 |
|
20.2 Relocation of Buildings,
Utilities, Highways, and Other Services: |
4.002 |
|
|
|
|
21.0 Structures and Site Facilities:
|
428.356 |
|
21.1 Site Improvements and
Facilities: |
27 |
|
21.2 Power Core Building: |
159.914 |
|
21.3 Turbine - Generator Building: |
76.9584 |
|
21.4 Heat Rejection Structures and
Facilities: |
11.6031 |
|
21.5 Electrical Equipment and Power
Supply Building: |
23.0114 |
|
21.6 Plant Auxiliary Systems
Building (including Switchgear): |
21.6522 |
|
21.7 Hot Cell Building (incl.
Maintenance and Radioactive Material Storage and Reprocessing): |
54.3709 |
|
21.8 Power Core Service Building
(Non-Radioactive Service?): |
4.32567 |
|
21.9 Service Water Building: |
1.51839 |
|
21.10 Fuel Handling and Storage
Building: |
25.2006 |
|
21.11 Control Room Building: |
7.12 |
|
21.12 On-Site A/C Power Supply
Building: |
4.72055 |
|
21.13 Administration Building: |
2 |
|
21.14 Site Service Building: |
2 |
|
21.15 Cryogenics and Inert Gas
Storage Building: |
2.09 |
|
21.16 Security Building: |
0.71 |
|
21.17 Ventilation Stack: |
4.16 |
|
|
|
|
22.0 Power Core Equipment: |
1381.57 |
|
22.1.0 Fusion Energy Capture and
Conversion: |
297.169 |
|
22.1.1 First Wall
and Blanket, replaceable, inboard and outboard: |
54.3922 |
|
22.1.2 Second
Blanket, life of plant: |
74.4042 |
|
22.1.3 Divertor
Assembly, upper and lower, replaceable: |
0.525676 |
|
22.1.4 High
Temperature Shield, outside of blanket and/or divertor, replaceable: |
19.3271 |
|
22.1.5 High
Temperature Shield, outside of replaceable HT shield, life of plant: |
118.816 |
|
22.1.6 Penetration Shielding (low
temperature, active and passive): |
29.704 |
|
22.1.7 Shield
cooling, low temperature: |
0 |
|
22.2.0 Plasma Confinement: |
311.142 |
|
22.2.1 Toroidal
Field Coils (conductor, case, bucking cyl., cryostat, struts, structure): |
241.547 |
|
22.2.1.1 Conductor
and Cable: |
36.405 |
|
22.2.1.2 Structural
Coil Case: |
105.371 |
|
22.2.1.3 Bucking
Cylinder: |
13.6725 |
|
22.2.1.4 Cryostat
and Thermal Shield: |
42.4027 |
|
22.2.1.5 Thermal
Isolation Struts: |
0 |
|
22.2.1.6
Anti-torque structure (upper + lower cap): |
43.6962 |
|
22.2.2 Poloidal
Field Coils (central solenoid and outer poloidal), lower spares incl: |
69.5949 |
|
22.2.3 Feedback
Control Coils (normal conducting): |
0 |
|
22.2.4 Cryogenicics for Plasma Confinement (incl
dewar vacuum pumping): |
0 |
|
22.2.5 Power
Supplies for Plasma Confinement: |
0 |
|
22.3.0 Plasma Formation and
Sustainment: |
78.0624 |
|
22.3.1 Heating and
Current Drive with power supplies (Primarily Steady State): |
55.0624 |
|
22.3.1.1 Ion
Cyclotron Resonance Frequency (ICRF) Fast Wave Heating and CD: |
3.7766 |
|
22.3.1.2 Lower
Hybrid (LH) Wave Plasma Heating and Current Drive: |
51.2858 |
|
22.3.1.3 Electron
Cyclotron Resonance Frequency (ECRF) Plasma Heating and CD: |
0 |
|
22.3.1.4 Neutral
Particle Beam Plasma Heating, Current Drive and Rotation: |
0 |
|
22.3.2 Startup
subsystems with power supplies: |
7 |
|
22.3.2.1 Electron
Cyclotron Resonance Freq. (ECRF) Wave Plasma Breakdown: |
0 |
|
22.3.2.2 Ion Cyclotron
Resonance Freq. (ICRF) Wave Current Initiation, Ramp-Up: |
0 |
|
22.3.2.3 Lower
Hybrid (LH)
Wave Current Initiation and Ramp-Up: |
0 |
|
22.3.3 Stability
Control subsystem with power supplies (Primarily Transient): |
0 |
|
22.3.3.1 Electron Cyclotron Resonance
Frequency (ECRF) Wave Plasma Control: |
0 |
|
22.3.3.2 Neutral
Particle Beam Plasma Control: |
0 |
|
22.3.4 Plasma
Fueling and Constituent Control: |
16 |
|
22.3.4.1 Pellet
Injection Fueling and Constituent Control: |
0 |
|
22.3.4.2 Neutral
(Particle) Beam Injection (NBI) Fueling and Constituent Control: |
0 |
|
22.4.0 Vacuum, Power Core: |
215.599 |
|
22.4.1 Vacuum
Vessel: |
168.243 |
|
22.4.2 Helium
Liquefier-Refrigerators: |
15 |
|
22.4.3 Primary
Vacuum Pumps (cryocondensation, cryosorption,
cryodiffusion, and/or turbo-molecular): |
0 |
|
22.4.4 Roughing or
Backing Pumps: |
0 |
|
22.4.5 Vacuum Pumping
Ducts (vac duct shielding in 22.01.06): |
32.3555 |
|
22.4.6 Plumbing,
Cryogenic: |
0 |
|
22.5.0 Primary Structure and Support,
Power Core: |
48.8242 |
|
22.5.1
Carry-Through Structure: |
0 |
|
22.5.2 Structural
Pedestal: |
0 |
|
22.5.3 Equipment
Support Structure: |
0 |
|
22.6.0 Main Heat Transfer and
Transport (MHTT): |
175.261 |
|
22.6.1 Dual-Coolant
System: PbLi servicing FW, Blanket, HT shield, He
servicing Divertor, and Nb IHX: |
175.261 |
|
22.6.2 Primary (Helium) Heat Transfer
Loop (Servicing FW, blanket, and
HT shield): |
0 |
|
22.6.3 Limiter or
Divertor Primary Heat Transfer Loop (May tie into same IHX, SG): |
0 |
|
22.6.4 Intermediate
Heat Transfer Loop (Sodium or Helium): |
0 |
|
22.7.0 Radioactive Materials Treatment
and Management (off-line): |
15.3302 |
|
22.7.1 Liquid
Materials Processing Equipment
(including final detritiation): |
0 |
|
22.7.2 Gaseous
Materials Processing Equipment (including final detritiation):
|
0 |
|
22.7.3 Solid
Materials Processing Equipment
(including detrititation): |
0 |
|
22.8.0 Fuel Handling and Storage
(on-line): |
71.5407 |
|
22.8.1 Chamber
Exhaust Gas Handling and Processing Equipment: |
0 |
|
22.8.2 Purge and Cover Gas Handling
Processing Equipment: |
0 |
|
22.8.3 Primary
Coolant Stream Handling and Processing Equip. (incl.
on-line adj. of Li enrichment): |
0 |
|
22.8.4 Other Liquid
and Gaseous Coolant Stream Handling and Processing Equipment: |
0 |
|
22.8.5 Purification
and Isotope Separation Equipment: |
0 |
|
22.8.6 Tritium,
Deuterium, and DT Storage Equipment: |
0 |
|
22.8.7 Atmospheric
Tritium Recovery Equipment (Power Core, Hot Cell, Fuel Handling Bldgs.): |
0 |
|
22.9.0 Maintenance Equipment: |
100.599 |
|
22.9.1 Power Core
Maintenance Equipment: |
0 |
|
22.9.2 Hot Cell
Maintenance Equipment: |
0 |
|
22.9.3 Fuel
Handling Maintennace Equipment: |
0 |
|
22.9.4 Other Plant
Equipment Maintenance Equipment: |
0 |
|
22.10.0 Instrumentation and Control: |
60 |
|
22.10.1 Power Core
Instrumentation & Control Equipment: |
0 |
|
22.10.2 Radiation
Monitoring Equipment: |
0 |
|
22.10.3 Isolated
Indicating & Recording Equipment: |
0 |
|
22.10.4 Data
Acquisition and Recording Equipment: |
0 |
|
22.10.5
Communications Equipment: |
0 |
|
22.11.0 Other Power Core Equipment: |
8.04789 |
|
22.11.1 Special
Heating Equipment: |
0 |
|
22.11.2 Special Cooling Equipment (low
temp shield, vacuum vessel, other structures): |
0 |
|
22.11.3 Coolant
Receiving, Storage and Makeup Equipment: |
0 |
|
22.11.4 Gas Systems
Equipment: |
0 |
|
22.11.5 Inert
Atmosphere Equipment (Power Core, Hot Cell, and Fuel Handling Buildings): |
0 |
|
22.98.0 Spare Parts Allowance (include
in individual costs): |
0 |
|
22.99.0 Contingency Allowance (include
in Acct 96): |
0 |
|
|
|
|
23.0 Turbine - Generator Equipment: |
352.187 |
|
23.1.0
Turbine - Generators: |
0 |
|
23.2.0 Main Steam or other Main Heat
Transfer Fluid System: |
0 |
|
23.3.0 Condensing or Heat Sink Heat Exhanger Systems: |
0 |
|
23.4.0 Feedwater
Heating or Heat Recovery System: |
0 |
|
23.5.0 Other Turbine Plant Equipment: |
0 |
|
23.6.0 Turbine Plant Instrumentation
& Control: |
0 |
|
23.98.0 Spare Parts Allowance (include
in individual costs): |
0 |
|
23.99.0 Contingency Allowance (include
in Acct 96): |
0 |
|
|
|
|
24.0 Electric Plant Equipment: |
185.556 |
|
24.1.0 Switchgear: |
0 |
|
24.2.0 Station Service Equipment: |
0 |
|
24.3.0 Switchboards: |
0 |
|
24.4.0 Protective Equipment: |
0 |
|
24.5.0 Electrical Structures and
Wiring Containers: |
0 |
|
24.6.0 Power and Control Wiring: |
0 |
|
24.7.0 Electrical Lighting: |
0 |
|
24.98.0 Spare Parts Allowance (include
in individual costs): |
0 |
|
24.99.0 Contingency Allowance (include
in Acct 96): |
0 |
|
|
|
|
25.0 Heat Rejection Equipment: |
34.2671 |
|
25.1.0 Water Intake Common Facilities:
|
0 |
|
25.2.0 Circulating Water Systems: |
0 |
|
25.3.0 Cooling Towers: |
0 |
|
25.4.0 Other Heat Rejection Systems: |
0 |
|
25.98.0 Spare Parts Allowance (incl. in
individual costs): |
0 |
|
25.99.0 Contingency Allowance (incl. in
Acct 96): |
0 |
|
|
|
|
26.0 Miscellaneous Plant Equipment: |
84.2128 |
|
26.1.0 Transportation and Lifting
Equipment: |
0 |
|
26.2.0 Air and Water Service Systems: |
0 |
|
26.3.0 Communications Equipment: |
0 |
|
26.4.0 Furnishings and Fixtures: |
0 |
|
26.98.0 Spare Parts Allowance (incl. in
individual costs): |
0 |
|
26.99.0 Contingency Allowance (incl. in
Acct 96): |
0 |
|
|
|
|
27.0 Special Materials: |
57.0995 |
|
27.1.0 Primary coolant (PbLi) w/ 2.5x BOP factor: |
56.0911 |
|
27.2.0 Divertor coolant (Helium) incl.
storage & pressurization subsystem: |
0.00238281 |
|
27.3.0 Intermediate Loop Coolant: |
0 |
|
27.4.0 Turbine cycle Working Fluids: |
0 |
|
27.98.0 Other Special Materials: |
0.603591 |
|
27.99.0 Argon Power Core Cover Gas: |
0.402394 |
|
|
|
|
|
|
|
90.0 Total Direct Cost: |
2547.3 |
|
|
|
|
91.0 Construction Facilities,
Equipment and Services: |
287.845 |
|
91.1.0 Temporary Facilities: |
0 |
|
91.2.0 Construction Equipment: |
0 |
|
91.3.0 Construction Services: |
0 |
|
|
|
|
92.0 Home Office Engineering and
Services: |
132.46 |
|
92.1.0 Systems Engineering: |
0 |
|
92.2.0 Management Services: |
0 |
|
92.3.0 Quality Assurance: |
0 |
|
92.4.0 Safety and Environmental
Engineering: |
0 |
|
|
|
|
93.0 Field Office Engineering and
Services: |
132.46 |
|
93.1.0 Construction Management: |
0 |
|
93.2.0 Inspection: |
0 |
|
93.3.0 Pre-Operational Training: |
0 |
|
|
|
|
94.0 Owner's Cost: |
465.009 |
|
94.1.0 Project Administration: |
0 |
|
94.2.0 Staff Training and Plant
Startup: |
0 |
|
94.3.0 Inventories and Spares
Administration: |
0 |
|
|
|
|
95.0 Process (design) Contingency: |
0 |
|
|
|
|
96.0 Project Contingency: |
522.283 |
|
|
|
|
97.0 Interest During Construction
(IDC): |
532.582 |
|
|
|
|
98.0 Escalation During Construction
(EDC): |
0 |
|
|
|
|
99.0 Total Project Capital Cost: |
4619.94 |
|
|
|
|
|
|
|
Cost of
Electricity (COE) [mills/kWh]: |
58.3027 |
|
|
|
|
Subcosts of
COE normalized to mills/kWh: |
|
|
... capital return: |
35.8905 |
|
... operation and maintenance: |
13.0946 |
|
... component replacement: |
7.13895 |
|
... fuel cost: |
0.178638 |
|
... decontamination and decommissioning: |
2 |
Costing
Algorithms: every account is multiplied by 'inflation(yearOrig, yearNew)' with a cost
credit factor
Printed
on Wed Jun 8
15:09:06 2011
c_20[1] = 20.0e6*pow(Pe/1000.0, 0.3)
c_20[2] = (20.01e6)*0.2
Pe = (*Machine).net_electrical_power()
c_21[1] = 27.0e6*pow(Asite/1000.0, 0.2)
c_21[2] = 111.846e6*pow(Vrb/80.0e3, 0.62)
c_21[3] = 79.03e6*pow(Pet/1246.0, 0.5)
c_21[4] = 16.832e6*pow((Pth-Pet)/1860.0,
0.5)
c_21[5] = 22.96e6*pow(Pe/1000.0, 0.3)
c_21[6] = 22.00e6*pow(Pet/1246.0, 0.3)
c_21[7] = 0.34*c_21[2]
c_21[8] = 4.316e6*pow(Pe/1000.0, 0.3)
c_21[9] = 1.515e6*pow(Pe/1000.0, 0.3)
c_21[10] = 25.0e6*pow(Pfusion/1759.0, 0.3)
c_21[11] = 7.12e6
c_21[12] = 4.71e6*pow(Pe/1000.0, 0.3)
c_21[13] = 2.00e6
c_21[14] = 2.00e6
c_21[15] = 2.09e6
c_21[16] = 0.71e6
c_21[17] = 4.16e6
Asite =
1000.0 [acres]
Pet = (*Machine).gross_electrical_power()
Pth =
(*Machine).thermal_power()
Pfusion = (*Machine).fusion_power()
Vrb =
(*Machine).volume() = 142404
vol_reactor_bldg = (pow((ksihi + 9.0), 2.0)*6.0*etahi + 1.55e5)*cATfit
ksihi = (*Core).bounding_box(2,
'outer')
etahi = (*Core).bounding_box(3,
'outer')
cATfit = 138698.0/181655.0
c_22_1[1] = ( (*FWInboard).cost() + (*FWOutboard).cost() + (*BlanketInboard).cost()
+ (*BlanketOutboard).cost() )*16.0
c_22_1[2] = (*BlanketII).cost()*16.0
c_22_1[3] = DivCost*16.0
c_22_1[4] = ( (*RepHTShield)[0].cost() + (*RepHTShield)[1].cost() )*16.0
c_22_1[5] = ( (*HTShield)[0].cost() + (*HTShield)[1].cost() )*16.0
c_22_1[6] = pen_shielding*c_22_1[5]
c_22_1[7] = 0.0
DivCost = for(int
i=0; i<6; i++) { DivCost = DivCost + (*Div)[i].cost() }
c_22_2_1[1] = (*TFCoil).sub_cost(0)*16.0
c_22_2_1[2] = (*TFCoil).sub_cost(1)*16.0
c_22_2_1[3] = (*BuckingCylinder).cost()*16.0
c_22_2_1[4] = (*CryoDome).cost()*16.0
c_22_2_1[5] = 0.0*16.0
c_22_2_1[6] = ((*UpperCap).cost() + (*LowerCap).cost())*16
(*TFCoil).sub_cost(0) = 2.27531e+06
(*TFCoil).sub_cost(1) = 6.58568e+06
c_22_2[1] = ((*TFCoil).cost() + (*BuckingCylinder).cost() + (*UpperCap).cost()
+ (*LowerCap).cost() + (*CryoDome).cost())*16.0
c_22_2[2] = PFCoilCost*16.0
c_22_2[3] = 0.0
c_22_2[4] = 0.0
c_22_2[5] = 0.0
PFCoilCost (main): for(int
i=0; i<36; i++) { PFCoilCost = PFCoilCost + (*PoloFCoil)[i].cost() }
PFCoilCost (spares): for(int i=4; i<18;
i++) { PFCoilCost = PFCoilCost + (*PoloFCoil)[i].cost() }
c_22_3_1[1] = (*Machine).cd_fast_wave_cost()
c_22_3_1[2] = (*Machine).cd_lower_hybrid_cost()
c_22_3_1[3] = 0.0
c_22_3_1[4] = (*Machine).cd_neutral_beam_cost()
c_22_3_2[1] = 0.0
c_22_3_2[2] = 0.0
c_22_3_2[3] = 0.0
c_22_3_3[1] = 0.0
c_22_3_3[2] = 0.0
c_22_3_4[1] = 0.0
c_22_3_4[2] = 0.0
c_22_3_4[0] = 16.0e6
c_22_3[1] = (*Machine).cd_cost()
c_22_3[2] = 7.0e6
c_22_3[3] = 0.0
c_22_3[4] = 16.0e6
c_22_4[1] = (cVV + cMP)*16.0
c_22_4[2] = 15.0e6
c_22_4[3] = 0.0
c_22_4[4] = 0.0
c_22_4[5] = cDuct*16.0
c_22_4[6] = 0.0
cVV = (*VacuumVessel)[0].cost()
+ (*VacuumVessel)[1].cost()
cMP = (*MPort).cost()
cDuct = (*Duct)[0].cost() +
(*Duct)[1].cost() + 2.0*(*Duct)[3].cost()
c_22_5[1] = 0.0
c_22_5[2] = 0.0
c_22_5[3] = 0.0
c_22_5[0] = support_structure_volume*0.20e6
support_structure_volume = 0.20*fpc_vol
fpc_vol = ((*FWInboard).volume()
+ (*FWOutboard).volume() + (*BlanketInboard).volume()
+ (*BlanketOutboard).volume() + (*BlanketII).volume()
+ (*RepHTShield)[0].volume() + (*RepHTShield)[1].volume()
+ 1.1*((*HTShield)[0].volume() + (*HTShield)[1].volume()) + (*VacuumVessel)[0].volume()
+ (*VacuumVessel)[1].volume() + DivVol
+ (*TFCoil).volume() + PoloFCVolume
+ PoloFCVolumeSpares) *16.0
DivVol:
for(int i=0; i<6; i++) { DivVol = DivVol + (*Div)[i].volume(); }
PoloFCVolume: for(int i=0; i<36;
i++) { PoloFCVolume = PoloFCVolume + (*PoloFCoil)[i].volume() }
PoloFCVolumeSpares: for(int i=4; i<18;
i++) { PoloFCVolumeSpares =
PoloFCVolumeSpares + (*PoloFCoil)[i].volume() }
c_22_6[1] = 125.0e6*pow(Pth*f_LiPb/2000,
0.55) + 0.01e6*Pth*f_LiPb +
110.0e6*pow(Pth*f_He/2000,
0.55)
c_22_6[2] = 0.0
c_22_6[3] = 0.0
c_22_6[4] = 0.0
f_LiPb = 0.8
f_He = 0.2
c_22_7[1] = 0.0
c_22_7[2] = 0.0
c_22_7[3] = 0.0
c_22_7[0] = 15.0e6*pow(Pfusion/1758.0, 0.8)
c_22_8[1] = 0.0
c_22_8[2] = 0.0
c_22_8[3] = 0.0
c_22_8[4] = 0.0
c_22_8[5] = 0.0
c_22_8[6] = 0.0
c_22_8[7] = 0.0
c_22_8[0] = 70.0e6*pow(Pfusion/1758.0, 0.8)
c_22_9[1] = 0.0
c_22_9[2] = 0.0
c_22_9[3] = 0.0
c_22_9[4] = 0.0
c_22_9[0] = 100.0e6*pow(Pe/1000.0, 0.8)
c_22_10[1] = 0.0
c_22_10[2] = 0.0
c_22_10[3] = 0.0
c_22_10[4] = 0.0
c_22_10[5] = 0.0
c_22_10[0] = 60.0e6
c_22_11[1] = 0.0
c_22_11[2] = 0.0
c_22_11[3] = 0.0
c_22_11[4] = 0.0
c_22_11[5] = 0.0
c_22_11[0] = 8.0e6*pow(Pe/1000.0, 0.8)
c_23[1] = 0.0
c_23[2] = 0.0
c_23[3] = 0.0
c_23[4] = 0.0
c_23[5] = 0.0
c_23[6] = 0.0
c_23[7] = 0.0
c_23[8] = 0.0
c_23[0] = 360.0e6*pow(P_thermal/2000,0.8)*(eta_brayton/0.6)
eta_brayton = (*Machine).gross_electrical_power()/Pth
c_24[1] = 0.0
c_24[2] = 0.0
c_24[3] = 0.0
c_24[4] = 0.0
c_24[5] = 0.0
c_24[6] = 0.0
c_24[7] = 0.0
c_24[8] = 0.0
c_24[9] = 0.0
c_24[0] = 187.0e6*pow(Pet/1200.0, 0.5)
c_25[1] = 0.0
c_25[2] = 0.0
c_25[3] = 0.0
c_25[4] = 0.0
c_25[5] = 0.0
c_25[6] = 0.0
c_25[0] = 89.17e6*((Pth-Pet)/2300.0)
c_26[1] = 0.0
c_26[2] = 0.0
c_26[3] = 0.0
c_26[4] = 0.0
c_26[5] = 0.0
c_26[6] = 0.0
c_26[0] = 85.0e6*pow(Pet/1200.0, 0.6)
c_27[1] = (PbLi_cost/1000.0)*m_LM_total*1.0e6
c_27[2] = (he_vol_in_div + he_vol_in_storage)*he_cost*4.215
c_27[3] = 0.0
c_27[4] = 0.0
c_27[5] = 0.6e6*pow(Pe/1000.0, 0.8)
c_27[6] = 0.4e6*pow(Pe/1000.0, 0.8)
4.215 = ave He
density between STP and 700C, 15 MPa
he_cost = (*Div)[0].cost_unit_mass('He')
m_LM_total = BOP*(m_LM + m_LM_div + m_LM_rhts + m_LM_hts)*16.0/1000.0
m_LM = (*FWInboard).liquid_metal_mass() + (*FWOutboard).liquid_metal_mass() + (*BlanketInboard).liquid_metal_mass() + (*BlanketOutboard).liquid_metal_mass() + (*BlanketII).liquid_metal_mass()
m_LM_div: for(int i=0; i<6; i++)
{ m_LM_div
= m_LM_div + (*Div)[i].liquid_metal_mass()
}
m_LM_rhts: for(int
i=0; i<2; i++) { m_LM_rhts = m_LM_rhts + (*RepHTShield)[i].liquid_metal_mass() }
m_LM_hts: for(int i=0; i<2; i++)
{ m_LM_hts
= m_LM_hts + (*HTShield)[i].liquid_metal_mass() }
BOP = 2.5
he_vol_in_div = div_vol*16.0*BOP*he_frac_div
he_frac_div = 0.526
div_vol: for(int
i=0; i<6; i++) { div_vol = div_vol + (*Div)[i].volume(); }
he_vol_in_storage = he_vol_in_div*0.10
mhtt_vol = ((*FWInboard).volume()
+ (*FWOutboard).volume() + (*BlanketInboard).volume()
+ (*BlanketOutboard).volume() + (*BlanketII).volume()
+ (*RepHTShield)[0].volume() + (*RepHTShield)[1].volume()
+ pen_shielding*((*HTShield)[0].volume()
+ (*HTShield)[1].volume()) )*16.0*BOP
c_90 = c_20[0] + c_21[0] + c_22[0] +
c_23[0] + c_24[0] + c_25[0] + c_26[0] + c_27[0]
c_91[1] = 0.0
c_91[2] = 0.0
c_91[3] = 0.0
c_91[0] = 0.1130*c_90
c_92[1] = 0.0
c_92[2] = 0.0
c_92[3] = 0.0
c_92[4] = 0.0
c_92[0] = 0.052*c_90
c_93[1] = 0.0
c_93[2] = 0.0
c_93[3] = 0.0
c_93[0] = 0.052*c_90
c_94[1] = 0.0
c_94[2] = 0.0
c_94[3] = 0.0
c_94[0] = 0.15*(c_90 + c_91[0] +
c_92[0] + c_93[0])
c_95 = 0.0*c_90
c_96 = 0.1465*(c_90 + c_91[0] +
c_92[0] + c_93[0] + c_94[0] + c_95)
c_97 = fidc*(c_90
+ c_91[0] + c_92[0] + c_93[0] + c_94[0] + c_95 + c_96)
fidc = 0.1303
c_98 = fedc*c_90
fedc = 0.0
c_99 = c_90 + c_91[0] + c_92[0] +
c_93[0] + c_94[0] + c_95 + c_96 + c_97 + c_98
cost_Of_Electricity = (c_AC
+ (c_OM + c_SCR + c_F) * pow(1.0 + y,Y)) / (8760.0*Pe*pf) + c_DD
** See input file costing.data
for input parameters: Xrdr, Lecon,
neutron_fluence_life, y, Y, pf, c_F,
c_DD.
fcr = Xrdr/(
1.0 - pow(1.0+Xrdr, -Lecon))
c_AC = fcr*c_99
Pe = (*Machine).net_electrical_power()
c_OM = 80.0e6*pow(Pe/1200.0,
0.5)
FWB_life = neutron_fluence_life/nwlmax
nwlmax = (*Machine).neutron_wall_load('maximum')
c_SCR = (c_22_1[1] + c_22_1[3] +
c_22_1[4] + c_22_3_1[0] + c_22_3_4[0] + c_22_4[5]) / (FWB_life/pf)
c_AC = fcr*c_99
coe_subcost[0] = c_AC
/(8760.0*Pe*pf)
coe_subcost[1] = c_OM*pow(1.0+y, Y)
/(8760.0*Pe*pf)
coe_subcost[2] = c_SCR*pow(1.0+y, Y) /(8760.0*Pe*pf)
coe_subcost[3] = c_F*pow(1.0+y, Y)
/(8760.0*Pe*pf)
coe_subcost[4] = c_DD
|
Part
Compositions for Tokamak Power Plant using SiC Blanket Module: |
|
|
||||
|
|
|
|
|
|
|
|
|
Part |
Material
|
Volume Frac |
Density Frac |
Den
(kg/m3) |
Cost/unit
mass |
Cost
Base Year |
|
---------------------------------------------------------------------------------------------------------------------- |
||||||
|
FirstWallInboard |
SiC-comp
|
0.73 |
0.95 |
3200 |
584.64 |
2009 |
|
FirstWallInboard |
PbLi |
0.27 |
0 |
8897 |
8.79 |
2009 |
|
FirstWallOutboard |
SiC-comp
|
0.73 |
0.95 |
3200 |
584.64 |
2009 |
|
FirstWallOutboard |
PbLi |
0.27 |
0 |
8897 |
8.79 |
2009 |
|
BlanketInboard |
SiC-comp
|
0.17 |
0.95 |
3200 |
584.64 |
2009 |
|
BlanketInboard |
PbLi |
0.83 |
0 |
8897 |
8.79 |
2009 |
|
BlanketOutboard |
SiC-comp
|
0.17 |
0.95 |
3200 |
584.64 |
2009 |
|
BlanketOutboard |
PbLi |
0.83 |
0 |
8897 |
8.79 |
2009 |
|
BlanketII |
SiC-comp
|
0.2 |
0.95 |
3200 |
584.64 |
2009 |
|
BlanketII |
PbLi |
0.77 |
0 |
8897 |
8.79 |
2009 |
|
BlanketII |
W |
0.03 |
1 |
19300 |
120.37 |
2009 |
|
Div1 |
RAFS-div
|
0.108 |
1 |
7800 |
111.77 |
2009 |
|
Div1 |
W |
0.359 |
1 |
19300 |
120.37 |
2009 |
|
Div1 |
He |
0.526 |
0 |
0.1786 |
70 |
2011 |
|
Div1 |
Void |
0.07 |
0 |
0 |
0 |
2009 |
|
Div2 |
RAFS-div
|
0.108 |
1 |
7800 |
111.77 |
2009 |
|
Div2 |
W |
0.359 |
1 |
19300 |
120.37 |
2009 |
|
Div2 |
He |
0.526 |
0 |
0.1786 |
70 |
2011 |
|
Div2 |
Void |
0.07 |
0 |
0 |
0 |
2009 |
|
Div3 |
RAFS-div
|
0.108 |
1 |
7800 |
111.77 |
2009 |
|
Div3 |
W |
0.359 |
1 |
19300 |
120.37 |
2009 |
|
Div3 |
He |
0.526 |
0 |
0.1786 |
70 |
2011 |
|
Div3 |
Void |
0.07 |
0 |
0 |
0 |
2009 |
|
Div4 |
RAFS-div
|
0.108 |
1 |
7800 |
111.77 |
2009 |
|
Div4 |
W |
0.359 |
1 |
19300 |
120.37 |
2009 |
|
Div4 |
He |
0.526 |
0 |
0.1786 |
70 |
2011 |
|
Div4 |
Void |
0.07 |
0 |
0 |
0 |
2009 |
|
Div5 |
RAFS-div
|
0.108 |
1 |
7800 |
111.77 |
2009 |
|
Div5 |
W |
0.359 |
1 |
19300 |
120.37 |
2009 |
|
Div5 |
He |
0.526 |
0 |
0.1786 |
70 |
2011 |
|
Div5 |
Void |
0.07 |
0 |
0 |
0 |
2009 |
|
Div6 |
RAFS-div
|
0.108 |
1 |
7800 |
111.77 |
2009 |
|
Div6 |
W |
0.359 |
1 |
19300 |
120.37 |
2009 |
|
Div6 |
He |
0.526 |
0 |
0.1786 |
70 |
2011 |
|
Div6 |
Void |
0.07 |
0 |
0 |
0 |
2009 |
|
RepHTShieldTop |
SiC-comp
|
0.15 |
0.95 |
3200 |
584.64 |
2009 |
|
RepHTShieldTop |
PbLi |
0.1 |
0 |
8897 |
8.79 |
2009 |
|
RepHTShieldTop |
B-FS |
0.75 |
1 |
7800 |
35.54 |
2009 |
|
RepHTShieldBottom |
SiC-comp
|
0.15 |
0.95 |
3200 |
584.64 |
2009 |
|
RepHTShieldBottom |
PbLi |
0.1 |
0 |
8897 |
8.79 |
2009 |
|
RepHTShieldBottom |
B-FS |
0.75 |
1 |
7800 |
35.54 |
2009 |
|
HTShieldInboard |
SiC-comp
|
0.15 |
0.95 |
3200 |
584.64 |
2009 |
|
HTShieldInboard |
PbLi |
0.1 |
0 |
8897 |
8.79 |
2009 |
|
HTShieldInboard |
W |
0.05 |
1 |
19300 |
120.37 |
2009 |
|
HTShieldInboard |
B-FS |
0.7 |
1 |
7800 |
35.54 |
2009 |
|
HTShieldOutboard |
SiC-comp
|
0.15 |
0.95 |
3200 |
584.64 |
2009 |
|
HTShieldOutboard |
PbLi |
0.1 |
0 |
8897 |
8.79 |
2009 |
|
HTShieldOutboard |
B-FS |
0.75 |
1 |
7800 |
35.54 |
2009 |
|
VacuumVesselMain |
RAFS |
0.13 |
1 |
9500 |
43.44 |
2009 |
|
VacuumVesselMain |
Void |
0.22 |
0 |
0 |
0 |
2009 |
|
VacuumVesselMain |
WC |
0.65 |
0.95 |
15600 |
34.39 |
2009 |
|
VacuumVesselOutboard |
RAFS |
0.3 |
1 |
9500 |
43.44 |
2009 |
|
VacuumVesselOutboard |
Void |
0.7 |
0 |
0 |
0 |
2009 |
|
TFMagnet |
SS316 |
0.735174
|
1 |
7860 |
68.657 |
1992 |
|
TFMagnet |
Nb3Sn |
0.020899
|
1 |
7500 |
92.7 |
1992 |
|
TFMagnet |
Cu |
0.124391
|
1 |
7300 |
65.4 |
1992 |
|
TFMagnet |
Inconel |
0.0266081
|
1 |
8440 |
96.02 |
2009 |
|
TFMagnet |
Polyamide
|
0.0264458
|
1 |
1920 |
16.516 |
1992 |
|
BuckingCylinder |
RAFS |
1 |
1 |
9500 |
43.44 |
2009 |
|
UpperCap |
RAFS |
1 |
1 |
9500 |
43.44 |
2009 |
|
LowerCap |
RAFS |
1 |
1 |
9500 |
43.44 |
2009 |
|
MaintenancePortOpening |
TF-coil |
1 |
1 |
7500 |
50.912 |
1992 |
|
PFCoil_0
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_1
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_2
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_3
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_4
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_5
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_6
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_7
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_8
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_9
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_10
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_11
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_12
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_13
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_14
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_15
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_16
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_17
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_18
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_19
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_20
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_21
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_22
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_23
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_24
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_25
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_26
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_27
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_28
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_29
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_30
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_31
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_32
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_33
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_34
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
PFCoil_35
|
PF-coil |
1 |
1 |
7500 |
82.919 |
1992 |
|
CryoDome |
RAFS-cryost |
0.18 |
1 |
7800 |
28.06 |
2009 |
|
CryoDome |
Void |
0.82 |
0 |
0 |
0 |
2009 |
|
MaintenancePort |
B-FS |
0.13 |
1 |
7800 |
35.54 |
2009 |
|
MaintenancePort |
Void |
0.22 |
0 |
0 |
0 |
2009 |
|
MaintenancePort |
WC |
0.65 |
0.95 |
15600 |
34.39 |
2009 |
|
UpperVVDuctBottomWall |
B-FS |
0.13 |
1 |
7800 |
35.54 |
2009 |
|
UpperVVDuctBottomWall |
Void |
0.22 |
0 |
0 |
0 |
2009 |
|
UpperVVDuctBottomWall |
WC |
0.65 |
0.95 |
15600 |
34.39 |
2009 |
|
UpperVVDuctTopWall |
B-FS |
0.13 |
1 |
7800 |
35.54 |
2009 |
|
UpperVVDuctTopWall |
Void |
0.22 |
0 |
0 |
0 |
2009 |
|
UpperVVDuctTopWall |
WC |
0.65 |
0.95 |
15600 |
34.39 |
2009 |
|
UpperVVDuctSideWall |
B-FS |
0.13 |
1 |
7800 |
35.54 |
2009 |
|
UpperVVDuctSideWall |
Void |
0.22 |
0 |
0 |
0 |
2009 |
|
UpperVVDuctSideWall |
WC |
0.65 |
0.95 |
15600 |
34.39 |
2009 |
